HOW TO SET UP A VAPE

In order to see how the vaporizer works, your instinct will be to press the fire button or draw on the mouthpiece. Stop !!! The most common mistake beginners make is pressing the button or drawing on the nozzle while the tank or pod is empty, this will cause a sharp hit and burn the cotton inside the coil. The result is a burnt taste when you go vaping and a really bad first impression of the taste of your e-liquid that you spent so much time tracing. If you follow our step-by-step setup guide below, you’ll be up and running in minutes and vaping like a pro.

STEP 1 — PREPARE YOUR DEVICE

Take your device out of the box and place it on a flat surface in front of you.

STEP 2 — FILL YOUR TANK OR POD WITH E-LIQUID

If you have a pod system, you will be refilling the pod. First, you will need to locate the fill cavity in your capsule. Most capsules are filled from the top or side, but this will be clearly stated on the packaging or in the manual.
If you have a traditional tank, you need to determine if your tank is top or bottom fill.

Now that you have your tank or pod ready to fill, grab your e-liquid bottle and slowly fill the tank or pod. Be careful not to spill. Some tanks and capsules will have a maximum fill line. Once you have filled your tank or pod, close the lid and proceed to Step 3.

STEP 3 — PRIME YOUR COIL

This is an important step to get the optimal taste and experience. Let your tank or pod sit for 5 minutes before using it for the first time … yes, I know you feel like you’ve waited long enough … but trust me, it will be worth it.
What you’re trying to accomplish here is making sure the e-liquid soaks the cotton into the coil before applying heat. One coil has organic cotton inside that is soaked in the e-liquid. By letting your tank sit, you ensure that the cotton is actually soaked with e-liquid to avoid a dry hit and burning the coil.
Prime Your Coil — A popular method to help e-liquid soak up is priming. This gives you the added assurance that you won’t get that nasty dry hit. Remove your tank or capsule from the unit, so that it is in your hand, and slowly draw on the mouthpiece.

STEP 4 — ADJUSTMENTS OR NO ADJUSTMENTS?

There are 2 types of vaporizers; fixed power devices and variable power devices. This refers to the ability to adjust power settings and fine-tune the vaping experience. If you have a pod system, it is likely Type 1, but read through both types to be sure.
Type 1) If your device does NOT have a display screen and does NOT have controls on the side to adjust the power output, this means that it has a fixed power device; go to Step 6.
Type 2) If your device has a display screen and controls on the side to adjust the power, this means it has a variable power device; Continue with step 5.

STEP 5 — Set the output power

This step is for more advanced devices, usually a tank and mod setup. If you don’t have a display or the ability to adjust power settings, go to Step 6.
Before your first vaporizer, you need to make sure you have the correct settings to power the coil inside the tank. For example, the Aspire Zelos kit comes with a 1.8ohm BVC coil. This type of coil has a recommended power of 9–15 watts. To use the device correctly, you will configure your device to output between 9 and 15 watts.

If set incorrectly, this can lead to coil burning and that bad taste we talked about earlier. To find out what settings you need for your device, you can find this information in some places; in the manual or on the packaging, on the coil itself or on the coil packaging, or online from the manufacturer/retailer where you purchased your device.

STEP 6 — TAKE YOUR FIRST VAPE

Attach your pod or tank to the body of the device and you are good to go!
To test your new vaporizer for the first time; place your mouth on the drip tip/nozzle, begin to draw from the nozzle, and/or hold the fire button while drawing.

That’s all! Now you are vaping like a PRO! Read our tips on how to maintain your device and when to replace the coil correctly.
To get started, you can take a 1–2 second draw and then slowly adjust your draw time as you use the device.

WHEN AND HOW TO CHARGE YOUR DEVICE.

For most users, charging a vape coincides with charging your smartphone, so a good habit is to charge your Buy Nicotine Liquid Online every night when you lie down next to your smartphone. It is always recommended to use the assigned USB charging cable that comes with your device.

KEEP YOUR COIL / POD AND EXTEND ITS SERVICE LIFE.

One of the most important maintenance tips is to always have e-liquid inside your tank or capsule. Never let it dry out as this can damage the coil/cartridge and quickly reduce the life and duration of use.
The best practice is to refill your tank or pod when you see that it is about 1/3 full, it is best to fill it throughout the day and always make sure you have a bottle of e-liquid with you when you are away from home.

For best Buy Nicotine Liquid Online