HOW TO REPLACE THE GLASS ON VAPOR NRG TANK

As we continue to bustle with everyday life, potential accidents can damage your vape device. The good news is that in some cases, you do not have to buy a completely new device, you can just install some parts.

If you read this, there is a good chance you are currently looking at the broken Vaporesso NRG tank. Don’t worry. It is easily modified because certain products, such as Vaporesso, sell certain parts for replacement.

Read on for a quick and easy step-by-step guide on how to replace your Vaporesso glass tank.

NRG Tank Replacement Equipment

Here are all the things you will need to replace the NRG tank:

New Vaporesso NRG tank
New grommets (rubber bands) if needed
Paper towels (it is recommended to replace paper towels to reduce contamination in the event of e-juice leaks)
Tweezers
Paper cup

Step-by-Step Instructions

Step 1: Remove the tank from the mod.

Step 2: Hold the metal parts of the tank and wipe it. Remember the saying, “firmness, left-handedness.” Pour any juice into a can by dripping it into a cup.

Step 3: Remove the glass by holding the metal part and pulling it away from the glass. Discard the old glass tank.

Step 4: If you need to install grommets or rubber belts, hold your handkerchief.

Before you remove the grommets, note where the shortened part of the grommet goes before replacing it so you know how to direct the new grommet.

Gently pull the old grommets out of the leather.

Insert the new grommets into the pliers by securely inserting them into the air to ensure ventilation.

You will need to use your fingers to hold the grommets in place while inserting them through the holes. Be very gentle and walk slowly as these are the weakest straps.

If necessary, remove the upper chamber square to replace the small grommet inside the coil. Once this is done, Clear the upper room and return it tightly.

You only need to apply the grommets if they are torn or torn. Otherwise, you can leave them.

Step 5: Gently slide the new glass tank over the coil and secure it in place. Close the tank and make sure all parts are sealed together and sealed.

Success! You now have a new tank ready for use. Hit the back — you just fixed your vape!

Vaporesso NRG Replacement Components

With Vapor Kings, you can order NRG PE Replacement Glass Tank. You get one tank per order, it contains 3.5 ml of e-liquid nicotine and it is made with a glass of Pyrex.

The largest NRG replacement tank is the Vaporesso NRG-S containing 8 ml of e-juice — amazing power.

Both of these refunds are very affordable. With cheap prices and a simple repair program, you will get back to enjoying your vape right away.

We are here in the Vapor Kings community to be here to help you find simple solutions to any issues you may encounter. Whether you need a Vaporesso installation tank or you need a new battery, we are committed to getting you back to full breath as soon as possible. Browse Vapor Kings for repair tips and purchase all your device replacement needs contact e-liquid nicotine